Nickel 200 Welding Rod / Wire :

Nickel 200 Welding Rod / Welding Wire is made by using 99.6% of pure nickel. Nickel is one of the toughest metals and has high electrical and thermal conductivity. It has good ductility and low rate of hardening.  Due to its outstanding mechanical property, the material shows good resistance towards many corrosives over a wide range of temperatures. The corrosion resistance makes it particularly useful in structural application where resistance to corrosion is a prime consideration.

Leading supplier and exporters of nickel provide varieties of products globally as per the requirements of the customers. Nickel alloy come in sizes ranging from 0.25 mm to 6 mm. Common trade names are Nickel 200 and nickel 99.2. Nickel alloy wire/ rod is well known for its extreme toughness and corrosion resistance operating in both indoor and outdoor conditions, even under highly corrosive environments like sea water or hydroxides it is highly resistant to corrosion. These properties of nickel 200 it is useful in any environment, and make it easy to fabricate-able.


Nickel 200 Welding Rod, Nickel 200 Welding Rod / Wire, Nickel Alloy 200 Welding rod Supplier, Nickel Alloy 200 Welding rod / Welding wire, Nickel 200 Welding Wire Supplier & Exporters.

Nickel 200 Welding Rod / Wire, Nickel 200 Welding Rod / Wire, Nickel Alloy 200 Welding Rod Exporter, Nickel Alloy 200 Welding Wire, Nickel Alloy 200 Welding Rod / Wire Supplier & Exporters.

Forms:  Nickel alloy 200 offers varieties of forms including bar, wire, plate sheet, forgings, pipe fittings, weld rods, welded pipe, and tube, etc. Nickel alloy can be shaped into any form under heat treatment and can be cooled down by any process.

Nickel 200 Welding Rod / Welding Wire has many different industrial applications which include Electrical and electronic parts, aerospace, missile components, rocket motor cases, wires for a heating element, battery connection, and terminals, synthetic fiber processing, etc.

Specification :
Standard : ASTM B 160 / ASME SB 160
Size : 1 mm, 2.5 mm, 3.15 mm
Length : 350 mm, 450 mm
Diameter : 10 mm To 100 mm

Nickel 200 Welding Rod/Wire Chemical Composition
C : 0.15 max
Fe : 0.4 max
S : 0.01 max
Ni : 99.0 min
Mg : -
Ti : -

Nickel Alloy 200 Welding Wire/Rod Mechanical Property
Density : 8.9 g/cm3
Melting Point : 1446 °C (2635 °F)
Tensile Strength : Psi – 67000 , MPa – 462
Yield Strength (0.2%Offset) : Psi – 21500 , MPa – 148
Elongation : 45 %

Nickel 200 Welding rod / Welding wire : Nickel 200 Welding Wire | Nickel Alloy 200 Welding Rod / Wire | Nickel DIN 2.4066 Welding Wire | Nickel 200 Rod / Wire Exporter | Nickel 200 Tig Welding Rod | Nickel UNS N02200 Welding Rod | Welding Rod / Welding Wire | Nickel Alloy 200 Welding Rods / Welding Wire Exporter | Nickel 200 Welding Rod | Nickel Alloy 200 Welding Rod

 

Export Destinations For Grade Nickel 200 Welding rod / Welding wire

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay