Stainless Steel : ER16-8-2 Wires :

SS ER16-8-2 Wires, ER16-8-2 SS Welding Wire, ER16-8-2 Wire, ER16-8-2 SS TIG welding wire, Stainless Steel 2535nb Wire Rope, Stainless Steel ER16-8-2 Wires, SS ER16-8-2 Filler Wires, ER16-8-2 SS Flux Cored Wire, ER16-8-2 Stainless Steel Mig Welding Wire, SS ER16-8-2 Wire Supplier & Exporters.

Shanti Metal Corporation is a leading manufacturer, supplier, and exporter of ER16-8-2 Wires in Mumbai India. ER16-8-2 Wires are manufactured using high-quality raw materials and advanced technology as per globally accepted quality standards. ER16-8-2 is not generally used for corrosion resisting applications but for high-temperature applications where good thermal embrittlement resistance and creep strength are required. Typical applications include the petrochemical plants. Typical service temperatures up to 800 degrees C. ER16-8-2 also has useful properties down to -196 degree C. The lean composition and low ferrite typically found in 16.8.2 type weld metals provide excellent microstructural stability and ductility retention for service at elevated temperature.

ER16-8-2 wire is primarily used for welding stainless steel Types 308H, 316H, and 321/347 with carbon contents ranging from 0.04-0.10 percent for high pressure, high-temperature piping systems. ER16-8-2 is well suited for welding catalytic crackers, thick wall steam piping, and furnace parts, as well as components in the petrochemical, chemical processing, and power generation industries. ER16-8-2 wire also known as 16Cr-8Ni2Mo contains 16 percent Chromium, 8 percent nickel, 2 percent molybdenum. It exhibits various features like cut length, Low ferrite weld deposit (1-5), Cryogenic toughness properties down to -196 degrees C (-320 degrees F), high pressure and high-temperature resistance, good hot ductility properties, which offer greater freedom from weld or crater cracking even under restraint conditions. Our ER16-8-2 SS Wires are used in various applications which include Furnace parts, Gas and steam turbine, Petrochemical, Chemical process plants, Power generation industries, Cryogenic applications, Catalytic crackers, and Steam Piping, etc.

Specification :
range : 0.8 mm, 0.9 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm.
Diameter : 0.13 mm.
Finish : bright and shiny with no grease on the surface
Temper : annealed
Packing : 4 kg spools, spool wrapped with shrink film then 4 spools packed in carton box, carton boxes in wooden case

Stainless Steel ER16-8-2 Wires Deposit Analysis(%)
%C : 0.04-0.10 - 0.06
%Mn : 1.0-2.0 - 1.4
%Si : 0.3-0.6 - 0.4
%S : 0.02 max - 0.01
Ni : 0.03 max - 0.01
%Cr : 14.5-16.5 - 15.5
%Ni : 7.5-9.5 - 8.5
%Mo : 1.0-2.0 - 1.3
%Cu : 0.3 max - 0.1

Stainless Steel ER16-8-2 Wires Mechanical Properties
- Yield Strength(2) Tensile Strength MPa (ksi) Elongation % Charpy V-Notch J (ft•lbf) @-196°C (-321°F)
Requirements AWS ER16-8-2 - - - -
Typical Performance(2) As-Welded 360 (52) 630 (91) 29 min 30