Incoloy 825 Welding Rod / Wire :

The incoloy 825 welding rod /welding wire at shanti metals which offers good mechanical properties at both room and elevated temperatures that could be at 550 degree Celsius. These rods and wires are made of incoloy alloys and have improved resistance to aqueous corrosion. It has got molybdenum which offers good resistance towards the pitting and cervice corrosion. This is used for chemical processing in the chemical industries. This is having a very good use in the equipments of the pollution controlling applications.

This is having a very good application in the oil and gas piping factories due to its good resistance qualities. This is also good for the nuclear fuel reprocessing, acid production and pickling equipment. This is having the maximum durable temperature of up to 1000 degree Celsius, above that it could lose some its ductile properties and there may be the changes in the structural changes.

Incoloy 825 Welding Rod Exporter, Incoloy 825® Alloy Welding Rod / Wire, Incoloy DIN 2.4858 Welding Rod / Wire, Incoloy 825 Welding Rod / Wire, Incoloy 825 Welding Wire Supplier & Exporters.

Incoloy UNS N08825 Welding Rod / Wire Supplier, Incoloy 825 Welding Wire, Incoloy 825 Alloy Welding Rod Exporter, Incoloy 825 Welding Rod Exporter, Incoloy Welding rod / Welding wire Supplier & Exporters.

For the formation of the wire there is no need for the quenching with this alloy. These rods posses good leakage integrity which is good for the low-pressure and at the low-pressure installation where vibration is required. at the shanti metals we form the welding rods which has good yield strength with the plastic deformation.

The incoloy 825 welding rod /welding wire is available in different sizes like of 1.60 mm, 2.00 mm, 2.50 mm, 3.15 mm, 3.20mm, 3.25 mm, 4.0mm and 5.00mm and length from 250 mm to 450 mm. this has the packaging in the plastic tubes with maximum weight of 2.5kg, vacuum pack of 2kg to 5kg and also in the master cartoon of 20 kg.

Specification :
Specification : ASME/ASTM SB/B 166
Standard : AWS A5.14 ERNiCr-3, AWS A5.11 ENiCrFe-3
International Standard : BS 3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4858 TÜV 305 AFNOR-NC 15 Fe
Length : 36" (914mm)

Incoloy 825 Welding Rod/Wire Chemical Composition
c : 0.05 max
si : 0.5 max
Mn : 1.0 max
Cr : 19.5 – 23.5
Ni : 38.0 – 46.0
Mb : 2.5 – 3.5
Fe : 22.0 min
Cu : 1.5 – 3.0
Al : 0.2 max

Incoloy Alloy 825 Mechanical Properties
Density : 8.14 g/cm3
Melting Point : 1400 °C (2550 °F)
Tensile Strength : Psi – 80,000 , MPa – 550
Yield Strength (0.2%Offset) : Psi – 32,000 , MPa –220
Elongation : 30 %

Incoloy 825 Welding rod / Welding wire : Incoloy 825 Alloy Welding Rods / Welding Wire Exporter | Incoloy 825 Welding Wire | Incoloy 825® Alloy Welding Rod / Wire | Incoloy 825 Rod / Wire Exporter | Incoloy UNS N08825 Welding Wire | Incoloy 825 Tig Welding Rod | Welding Rod / Welding Wire | Incoloy 825 Alloy Welding Rod | Incoloy DIN 2.4858 Welding Wire/Rod | Incoloy 825 Welding Rod


Export Destinations For Grade Incoloy 825 Welding rod / Welding wire


  Saudi Arabia


  South Africa
  Equatorial Guinea
  The Republic Of Congo


  Costa Rica
  Puerto Rica
  Trinidad And Tobago


  Czech Republic


  South Korea
  Sri Lanka