Titanium Alloys : Plates :

Titanium Plates, Titanium Shim Plates, Gr2 Titanium Plates, Titanium grade 2 Plates, 6Al-4V Titanium Plates, 6Al-4V ELI Titanium Plates Supplier & Exporters.

Shanti Metals is one of the most reputed Importers and Exporters in all types of Metals in India. We offer Titanium Alloy Plates & Titanium grade 2 Plate in different type of thickness, specification, grades and dimensions. It’s a grouping of first-rate corrosion resistance and good strength, showing the highest strength of all the unalloyed grades. They have a high temperature treatable and have high strength and ductility together with unsurpassed weldability and fabricability.
Titanium Alloy Plates are extensively used in different applications industry, and are made up of from urbane technology and superior grade of raw materials. They are used in a series of chemical procedure paraphernalia as well as in marine and aeronautical applications.

Specification :

Size Range :-
Thickness : 0.3mm to 50mm
Width : 100mm to 3000mm
Length : 1000mm above

Grade 2 Titanium (available in Plate, Round, Sheet, Tube)
6Al-4V Titanium (available in Round)
6Al-4V ELI Titanium (available in Round)

Grade 2 Titanium
Grade 2 titanium, in its annealed state, is a ductile metal with the approximate strength of 6061-T6 aluminum. It is used where corrosion resistance is an important criteria, or where operating temperatures preclude the use of aluminum.

Grade 2 (a/k/a CP-2) Titanium
Minimum Properties Ultimate Tensile Strength, psi 50,000
Yield Strength, psi 40,000 - 65,000
Elongation 20% min
Rockwell Hardness B70 - B90
Chemistry Titanium (Ti) 99.2%
Carbon (C) 0.1% max
Iron (Fe) 0.3%
Hydrogen (H) 0.015% max
Nitrogen (N) 0.03% max
Oxygen (O) 0.25% max

6Al-4V (a/k/a Grade 5) Titanium
This alloy of titanium shows a substantial strength improvement over aluminum, and is roughly twice as strong as 7075-T6 aluminum. It is also substantially harder to work and/or machine than Grade 2 titanium. Most machinists rate this material as slightly more difficult to machine than T-316L stainless steel, and recommend slow speeds and lots of lubrication.

6Al-4V (a/k/a Grade 5) Titanium
Minimum Properties Ultimate Tensile Strength, psi 138,000
Yield Strength, psi 128,000
Elongation 14%
Rockwell Hardness C36
Chemistry Titanium (Ti) 90%
Aluminum (Al) 6%
Vanadium (V) 4%
Iron (Fe) 0.25% max
Oxygen (O) 0.2% max

6Al-4V ELI (extra low interstitial) Titanium
The strength of this variant of 6Al-4V is slightly lower than its parent alloy, but it has improved fracture toughness and fatigue strength characteristics. It is also bio-compatible, and is often used in jewlery for body piercings.

6Al-4V ELI (extra low interstitial) Titanium
Minimum Properties Ultimate Tensile Strength, psi 125,000
Yield Strength, psi 115,000
Elongation 15%
Rockwell Hardness C35
Chemistry Titanium (Ti) 90%
Aluminum (Al) 6%
Vanadium (V) 4%
Iron (Fe) 0.14% max
Oxygen (O) 0.13% max